OPEN ACCESS

Articles online

Aerosol Pollution Characterization before Chinese New Year in Zhengzhou in 2014

Category: Aerosol and Atmospheric Chemistry

Accepted Manuscripts
DOI: 10.4209/aaqr.2018.06.0226
PDF

Export Citation:  RIS | BibTeX

Xiuli Wei 1, Huaqiao Gui1,3, Jianguo Liu1,3, Jie Zhang2, Schwab James2, Minguang Gao1

  • 1 Key Laboratory of Environmental Optics and Technology, Anhui Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Hefei 230031, China
  • 2 Atmospheric Sciences Research Center, University at Albany, State University of New York, Albany and Wilmington, NY 12222, USA
  • 3 CAS Center for Excellence in Regional Atmospheric Environment, Institute of Urban Environment, Chinese Academy of Sciences, Xiamen 361021, China

Highlights

Measured the inorganic compounds in PM2.5 with FTIR in Zhengzhou.
The pollutions shrink was discussed.
The transportation was the main reason for the high sulfate concentration in Stage 2.
Nitrate formed through homogeneous gas-phase reactions in Stage 2.
The hygroscopic growth of particles may be the primary reason for the high PM2.5 in Stage 3.


Abstract

Fourier-transform infrared (FTIR) spectroscopy is a useful and nondestructive method for measuring the current atmospheric concentrations of inorganic compounds (sulfate, nitrate, and ammonium). It has been extensively used for environmental monitoring since the 1980s. In this study, we used FTIR spectroscopy to measure the inorganic compounds in particulate matter with a diameter of less than 2.5 µm and combined the data of gaseous pollutants (NO2 and SO2) to analyze the inorganic compounds in PM2.5 from January 24 to January 31, 2014, in Zhengzhou. The measurement period was divided into three pollution process stages. Stage 1 (January 24 to January 26) was the low-pollution stage, in which the wind from the east of Zhengzhou caused the pollutants to rapidly disperse and the haze to clear. During Stage 2 (January 26 to the noon of January 30), the sulfur oxidation ratio corrected poorly with SO42− (R2 = 0.45), suggesting that transportation was the main reason for the high sulfate concentration. The nitrogen oxidation ratio corrected well with nitrate (R2 = 0.91), suggesting that nitrate was formed through homogeneous gas–phase reactions of NO2 with OH or O3 to form HNO3 in PM2.5. During Stage 3 (afternoon of January 30 to January 31), the average concentration of PM2.5 changed from approximately 140 µg m–3 to 260 µg m–3, and the concentrations of sulfate, nitrate, and ammonium changed from 37.62 µg m–3, 56.63 µg m–3, and 34.63 µg m–3 to 32.14 µg m–3, 31.14 µg m–3, and 26.35 µg m–3, respectively. The hygroscopic growth of particles may be the primary reason for the high levels of PM2.5 during this period.

Keywords

FTIR Inorganic compounds PM2.5 Hygroscopic growth


Related Article

Aerosol Emissions from Long-Lasting Smoldering of Boreal Peatlands: Chemical Composition, Markers, and Microstructure

Olga B. Popovicheva , Guenter Engling , I-Ting Ku, Mikhail A. Timofeev, Natalia K. Shonija
Accepted Manuscripts
DOI: 10.4209/aaqr.2018.08.0302
PDF

Characteristics of Air Pollutants and Greenhouse Gases at a Regional Background Station in Southwestern China

Linjun Cheng, Dongsheng Ji , Jun He, Liang Li, Li Du, Yang Cui, Hongliang Zhang, Luxi Zhou, Zhiqing Li, Yingxing Zhou, Chengyuan Miao, Zhengyu Gong, Yuesi Wang
Accepted Manuscripts
DOI: 10.4209/aaqr.2018.11.0397
PDF
;