OPEN ACCESS

Articles online

Dust Loading Performance of the PTFE HEPA Media and its Comparison with the Glass Fibre HEPA Media

Category: Aerosol Emission Control Technologies and Policies

Volume: 18 | Issue: 7 | Pages: 1921-1931
DOI: 10.4209/aaqr.2017.11.0481
PDF

Export Citation:  RIS | BibTeX

Wanyi Zhang1,2, Shiming Deng2, Yongxiang Wang1, Zhongping Lin 1

  • 1 Institute of HVAC & Gas Engineering, School of Mechanical Engineering, Tongji University, Shanghai 200092, China
  • 2 Department of Building Service Engineering, Hong Kong Polytechnic University, Kowloon, Hong Kong

Highlights

The surface filtration mode of PTFE HEPA media is studied.
k2 was defined to reflect the instantaneous growth rate of dynamic resistance.
Energy consumption evaluation for HEPA media by calculating average resistance.
Overall PTFE media are more energy efficient compared to glass fiber.


Abstract

HEPA filter media have been used in many fields to maintain super clean air in an indoor environment. Due to their much lower initial resistance, PTFE HEPA media has increasingly attracted the interest of researchers. Solid KCl particles loading experiments were conducted to examine the dust loading performance of PTFE media and compare it with that of glass fiber media. The experimental results provided insights into the surface deposition mode of particles captured by PTFE media. A new resistance growth coefficient, k2, was defined to reflect both the instantaneous growth rate of the dynamic pressure drop and the dust loading stage of HEPA media. In addition, a method of evaluating the energy consumption of HEPA media was developed by calculating the average pressure drop during laboratory dust loading experiments. Based on the results, PTFE overall is more energy efficient than glass fiber except in circumstances of heavy loading or infrequent maintenance.

Keywords

Surface filtration Resistance growth coefficient Average dynamic pressure drop


Related Article

;