OPEN ACCESS

Articles online

Analysis of Beta Attenuation Monitor Filter Rolls for Particulate Matter Speciation

Category: Aerosol and Atmospheric Chemistry

Volume: 17 | Issue: 1 | Pages: 14-23
DOI: 10.4209/aaqr.2016.03.0122
PDF | RIS | BibTeX

Suresh Raja1,4, Sriraam R. Chandrasekaran3, Lin Lin2, Xiaoyan Xia2, Philip K. Hopke 2, Kalliat T. Valsaraj4

  • 1 Enercon Services, Inc., 15770 North Dallas Parkway, Suite 400, Dallas, TX 75248, USA
  • 2 Center for Air Resources Engineering and Science, Clarkson University, Potsdam, NY 13676, USA
  • 3 Illinois Sustainable Technology Center, Prairie Research Institute, University of Illinois, Urbana–Champaign, Illinois 61820, USA
  • 4 Cain Department of Chemical Engineering, Louisiana State University, Baton Rouge, LA 70802, USA

Highlights

Use of BAM filter rolls for chemical speciation.
Demonstrate use of existing BAM filter substrates for speciation of PM.
Methods to statistically predict the major composition of PM samples.
Results indicate the need for future work to test alternate filter substrates.
Future work to probe possible BAM instrument modifications.


Abstract

Instruments such as Beta Attenuation Monitors (BAMs) provide real-time PM2.5 mass concentration data and are now widely used in compliance monitoring networks. These devices collect the PM on a filter tape in 1-hour samples. In this work, the use of BAM filter spots for chemical speciation was investigated. Filter tapes from several sites in California were analyzed for a series of chemical species including elements, ions, organic and elemental carbon, and molecular markers. A major issue was the blank values in the filter tape. Based on blank spot analyses, it was determined that measurement of organic and elemental carbon (OC/EC) and elements were infeasible. A total of 22 BAM samples (each comprising 24 1-hour spots) from 12 sites were analyzed for ions and black carbon (BC). Additionally, 336 1-hour spots were composited to analyze for molecular markers (MM). Measurements of ions and BC at each site appear to have been underestimated likely due to volatilization losses. MM measurements in these 336 BAM filter spots suggest that organic speciation of BAM filters could be a viable method for measuring useful marker species. Statistical analysis was conducted by grouping samples into classes with mass concentrations greater and less than 80 µg m–3. Measurement of Delta-C concentrations (i.e., Delta C = BC370 nm – BC880 nm) in these two groups of samples revealed that most of the high PM2.5 concentration days PM2.5 greater than 80 µg m–3) were likely not substantially impacted by biomass combustion particles. A major portion of the samples analyzed in this work with high concentrations of PM2.5 were inorganic species such as ammonium sulfate, ammonium nitrate and other ions. Results suggested that some useful information may be derived from BAM tape analyses. However, different filter substrates and sample handling and storage practice might make a wider range of analyses possible.

Keywords

PM2.5 Speciation Glass-Fiber Filter Beta Attenuation Monitor (BAM) Archived filters


Related Article

Aerosol Pollutants during Agricultural Biomass Burning: A Case Study in Ba Vi Region in Hanoi, Vietnam

Olga B. Popovicheva , Natalia K. Shonija, Natalia Persiantseva, Mikhail Timofeev, Evangelia Diapouli, Konstantinos Eleftheriadis, Laura Borgese, Xuan A. Nguyen
Accepted Manuscripts
DOI: 10.4209/aaqr.2017.03.0111
PDF

Characteristics of Summertime Volatile Organic Compounds in the Lower Free Troposphere: Background Measurements at Mt. Fuji

Chang-Feng Ou-Yang, Chih-Chung Chang , Jia-Lin Wang, Kojiro Shimada, Shiro Hatakeyama, Shungo Kato, Jia-Yang Chiu, Guey-Rong Sheu, Neng-Huei Lin
;