About AAQR

Aims and Scope

Articles online
For contributors
Call for Papers
Guideline for the
Special Issue Proposal
Subscription
Information

Advertising

Contact Us
 
Search for  in   Search  Advanced search  

 

Volume 12, No. 5, October 2012, Pages 745-769 PDF(3.86 MB)  
doi: 10.4209/aaqr.2012.05.0132   

A Review of CO2 Capture by Absorption and Adsorption

Cheng-Hsiu Yu, Chih-Hung Huang, Chung-Sung Tan

Department of Chemical Engineering, National Tsing Hua University, Hsinchu 30013, Taiwan

 

Abstract

 

Global warming resulting from the emission of greenhouse gases, especially CO2, has become a widespread concern in the recent years. Though various CO2 capture technologies have been proposed, chemical absorption and adsorption are currently believed to be the most suitable ones for post-combustion power plants. The operation of the chemical absorption process is reviewed in this work, together with the use of absorbents, such as the ionic liquid, alkanolamines and their blended aqueous solutions. The major concerns for this technology, including CO2 capture efficiency, absorption rate, energy required in regeneration, and volume of absorber, are addressed. For adsorption, in addition to physical adsorbents, various mesoporous solid adsorbents impregnated with polyamines and grafted with aminosilanes are reviewed in this work. The major concerns for selection of adsorbent, including cost, adsorption rate, CO2 adsorption capacity, and thermal stability, are compared and discussed. More effective and less energy-consuming regeneration techniques for CO2-loaded adsorbents are also proposed. Future works for both absorption and adsorption are suggested.

 

 

Keywords: CO2 capture; Absorption; Rotating packed bed; Adsorption; Amine-based adsorbents.

 

 

Copyright © 2009-2014 AAQR All right reserved.