About AAQR

Aims and Scope

Articles online
For contributors
Call for Papers
Guideline for the
Special Issue Proposal
Subscription
Information

Advertising

Contact Us
 
Search for  in   Search  Advanced search  

 

Volume 6, No. 1, March 2006, Pages 30-42 PDF(457 KB)  
doi: null   

Improvement on Hybrid SNCR-SCR Process for NO Control: a Bench Scale Experiment

Li-Chiang Chen

Department of Chemical Engineering, Ming Hsin University of Science and Technology 1, Hsin-Hsing Road, Hsin-Fong, Hsin-Chu, Taiwan, R.O.C.

 

Abstract

 

The reducing agent [ammonia (NH3)] injection procedure was improved for the hybrid process of selective non-catalytic reduction followed by selective catalytic reduction (hybrid SNCR-SCR) to remove nitric oxide (NO) through a bench-scale experiment. Instead of injecting all of the NH3 from the SNCR inlet, part of it was injected from the SNCR inlet and part from the SCR inlet, to react with NO in the flue gas. The experiment resulted in the significant reduction of NO. The effects of the operational conditions such as the SNCR reaction temperature, the SCR reaction temperature, and the initial concentration ratio of NH3 to NO were also investigated. Under the initial NO concentration of 300 ppm (dry, 6%O2), the space velocities of SNCR 5100-6300 hr-1 , the space velocities of SCR 7100-10000 hr-1 , and with the initial concentration ratios of NH3 to NO 1.0-1.5, the best operational temperatures were discovered to be SNCR reaction of 850°C and SCR reaction of 350°C for the improved hybrid SNCR-SCR process. In addition, a correlation equation has been developed of the maximum NO reduction under the above bestoperational temperatures for the hybrid SNCR-SCR process, and closely fits with the experiment results.

 

 

Keywords: Hybrid SNCR-SCR; NO reduction; Ammonia injection, Ammonia slip.

 

 

Copyright © 2009-2014 AAQR All right reserved.