About AAQR

Aims and Scope

Articles online
For contributors
Call for Papers
Guideline for the
Special Issue Proposal
Subscription
Information

Advertising

Contact Us
 
Search for  in   Search  Advanced search  

 

Volume 12, No. 6, December 2012, Pages 1409-1420 PDF(457 KB)  
doi: 10.4209/aaqr.2012.09.0260   

CO2 Emissions from a Steel Mill and a Petro-Chemical Industry

Ta-Chang Lin1, Chia-Yu Lee1, Wei-Tung Liao2, Hsiao-Hsuan Mi3, Shun-Shiang Chang1, Juu-En Chang1, Chih-Cheng Chao1

1 Department of Environmental Engineering, National Cheng Kung University, No. 1, University Road, Tainan City 70101, Taiwan
2 Department of Chemical and Materials Engineering, Southern Taiwan University of Science and Technology, No. 1, Nan-Tai Street, Yungkang Dist., Tainan City 71005, Taiwan
3 Department of Environmental Engineering and Science, Chia-Nan University of Pharmacy and Science, No. 60, Sec. 1, Erren Rd., Rende Dist., Tainan City 71710, Taiwan

 

Abstract

 

The CO2 emissions and energy flows of a steel mill A (mill A) and petro-chemical industry B (PCI B) in southern Taiwan were investigated in this study. And the feasibility of integrating the energy flows of mill A and nearby waste management plant E (WMP E) was also evaluated in order to improve the energy efficiency and reduce the CO2 emission. The results show that the annual energy consumption of mill A and PCI B were 6,045,518 and 11,957,543 KLOE (kiloliter of crude oil equivalent), respectively. Mill A utilized less than 5% of Taiwan’s total annual energy consumption, but it used high CO2 emission coefficient fuels and accounted for 8–9% of Taiwan’s total CO2 emission inventory. However, the energy efficiency was improved, and at least 15% of total steam produced in mill A came from waste heat recycling. By recovering waste heat in mill A, 63,420 tonnes of heavy fuel oil (HFO) consumption was prevented, and thus 177,513 tonnes of CO2 were not emitted. Furthermore, WMP E is able to produce about 578,993 tonnes of process steam (17.6 kg/cm2G × 275°C) annually. These results show that creating a steam-network between mill A and WMP E can not only reduce the amount of energy consumed by the industrial park, but also brought an extra benefit of 95 million NTD/yr for WMP E. This is the first study of an innovative steam-network at an industrial park in Taiwan, and the results of this work can further be applied in other locations to improve energy efficiency and reduce CO2 emissions.

 

 

Keywords: Energy flow; Energy efficiency; CO2 emission; Steam-network; Eco-society.

 

 

Copyright © 2009-2014 AAQR All right reserved.