About AAQR

Aims and Scope

Articles online
For contributors
Call for Papers
Guideline for the
Special Issue Proposal
Subscription
Information

Advertising

Contact Us
 
Search for  in   Search  Advanced search  

 

Volume 6, No. 1, March 2006, Pages 15-29 PDF(444 KB)  
doi: null   

Characteristics and Emission Factor of Fugitive Dust at Gravel Processing Sites

Chang-Tang Chang

Department of Environmental Engineering, National I Lan University, No. 1 Sheen-Long Road, I-Lan City, 260, Taiwan

 

Abstract

 

Particles emitted from gravel processing sites have severely worsened ambient air quality. This study analyzed the fugitive dust emission characteristics at selected pollution sources using several kinds of particle samplers, including TSP, PM10, PM2.5, and dry deposition plate. It is the first attempt to modify emission factors of AP-42 with a systematical study, utilizing domestic information under dimensionless analysis at the gravel processing sites. Results showed that TSP concentrations at the boundary of gravel sites ranged from 280 to 1,290 μg/m3. Moreover, PM10 concentrations ranged from 135 to 550 μg/m3 which were 1.2 - 1.5 times PM2.5 concentrations, which ranged from 105 to 470 μg/m3. Emission of unpaved roads accounted for about 45 - 55% of the total emission at the gravel processing sites. The silt and moisture content of gravel/sand/dust affected the emission rate of each emission source and ranged from 0.1 to 8.3 % for silt and from 0.6 to 14 % for moisture. After statistical analysis using the least square method, the domestic emission factors of four main emission sources were developed. Furthermore, the size coefficient of emission factors for TSP, PM10, and PM2.5 emission rate estimation equation were also determined in this study.

 

 

Keywords: Fugitive dust; Emission factor; Gravel processing sites; Dimensionless analysis.

 

 

Copyright © 2009-2014 AAQR All right reserved.