About AAQR

Aims and Scope

Articles online
For contributors
Call for Papers
Guideline for the
Special Issue Proposal
Subscription
Information

Advertising

Contact Us
 
Search for  in   Search  Advanced search  

 

Volume 17, No. 4, April 2017, Pages 1097-1104 PDF(422 KB)  
doi: 10.4209/aaqr.2016.11.0478   

Impact of Magnetic Tube on Pollutant Emissions from the Diesel Engine

Chia-Yang Chen1, Wen-Jhy Lee1,2, John Kennedy Mwangi1,2, Lin-Chi Wang3, Jau-Huai Lu4

1 Department of Environmental Engineering, National Cheng Kung University, Tainan 70101, Taiwan
2 Sustainable Environment Research Laboratories, National Cheng Kung University, Tainan 70101, Taiwan
3 Department of Civil Engineering and Geomatics, Cheng Shiu University, Kaohsiung 83347, Taiwan
4 Department of Mechanical Engineering, National Chung Hsing University, Taichung 40254, Taiwan

 

Highlights
  • Impact of magnetic tube on diesel engine performance was investigated.
  • The effect of magnetic tube on pollutant emission from diesel generator was evaluated.
  • Magnetic tube in diesel generator can reduce pollutant emissions.

Abstract

 

Magnetic field applied to fuel can alter its characteristics in terms of forces that hold the hydrocarbons together. This principle was used to investigate the impact of incorporating a magnetic tube in the fuel intake in a diesel generator on specifically the energy performance and pollutant emissions. A diesel generator was fitted with a magnetic tube in the fuel intake, which had valves to switch from without magnetic tube case to with magnetic tube case. The diesel generator was operated at constant speed of 1800 rpm at idle condition, 25% and 50% loads, respectively. Additionally, two real diesel cars were deployed with magnetic tube and their fuel consumption compared with that of a car without magnetic tube. With application of magnetic tube, the brake specific fuel consumption and fuel consumption were decreased by an average of 3.5% and 15%, respectively, while the brake thermal efficiency was improved by approximately 3.5%. The particulate matter, carbon monoxide, hydrocarbons and carbon dioxide emissions reduced in the range of 21.9–33.3%, 5.4–11.3%, 29.4–64.7% and 2.68–4.18%, respectively. Both the total PAH concentrations and total BaPeq concentrations can be reduced by about 63%, 45% and 51%, respectively for idle condition, 25% and 50% loads, respectively. These results show that application of magnetic tubes in the diesel engine is a promising technology in pollutant reduction and energy saving.

 

 

Keywords: Diesel engine; Magnetic tube; Regular pollutant; Energy performance; PAHs.

 

 

Copyright © 2009-2014 AAQR All right reserved.