About AAQR

Aims and Scope

Articles online
For contributors
Call for Papers
Guideline for the
Special Issue Proposal
Subscription
Information

Advertising

Contact Us
 
Search for  in   Search  Advanced search  

 

Volume 14, No. 3, April 2014, Pages 840-849 PDF(1.47 MB)  
doi: 10.4209/aaqr.2013.01.0028   

Effect of Heat Recovery from Flue Gas on the Local Humidity and NOx Dispersion in a Thermal Power Station

Shi Chang Wu1, Young Min Jo1, Young Koo Park2

1 Department of Environmental Science and Engineering, Kyung Hee University, Gyeonggi-Do 446-701, Korea
2 Department of Environmental Engineering, Kangwon National University, Samcheok 245-711, Korea

 

Abstract

 

The flue gas dispersion from the stack of a power station was investigated prior to addition of a high efficiency heat recovery facility. Decrease of the flue gas temperature from 115°C to 40°C by heat recovery could influence the local humidity and thermal NOx level. It might also result in the formation of a white large plume due to the early saturation of vapor around the stack, and deteriorate dispersion of thermal NOx. Numerical simulation revealed that the area influenced by flue gas has been enlarged, particularly in winter. The volume of visible plume indicating RH 1.0 increased to 120 m high and 80 m wide for the flue gas at 40°C, while a smaller plume was formed that was 85 m high and 50 m wide for that at 115°C. The humid air of the flue gas extended nearly 160 m further along the ground. The distance for the maximum NO2 concentration on the ground increased by 80 m and 50 m for 1 m/s wind and 3 m/s, respectively. The area influenced at the ground level expanded more than 250 m at 1 m/s wind after heat recovery. In particular, lowering the temperature of flue gas may affect the local environment more significantly in unusual cases including temperature inversions.

 

 

Keywords: Numerical simulation; Heat recovery; Flue gas; Gas dispersion; Nitrogen dioxide.

 

 

Copyright © 2009-2014 AAQR All right reserved.